Able to choose between teleoperated and autonomous and practice mode.Shows whether stop button is connected.Shows the battery's volts on the robot.Able to customize dashboard by editing the dashboard project.Shows the communication with some of the inputs and outputs including the solenoid, PWM.Only Digital and Analog Pins work with the Dashboard, other functions such as the accelerometer are disabled.Need to both install firmware (a hex file) onto the board and a USB interface image for Labview in order to get the FirstTouch running.Need to install PSoC programmer in order to install the firmware on the board.A board you can attach to a standard breadboard that allows you to use digital and analog devices with your driver station.Sometimes it does not work when plugged into the USB hub.Reboot Robot button no longer seems to work after Stop button is pressed, so manual reboot is needed.Have to reboot the cRio after pressing the stop button.Although you can bypass this by switching to Diagnostics tab, double-clicking on the red LED labeled Stop Button, and acknowledging the message.In general the program can not be run without connecting the stop button.Connected by the USB hub to the computer.Tablet – only for beta testing purposes. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |